877-723-7622 Based in Atlanta, Growing Safely Across the Nation

Rigger and Signal Person Training Buford GA

Qualified Rigger and Signal Person Training, Buford GA

Qualified Rigger & Signal Person Training

  • Understanding basic crane safety and set-up
  • Learn new caught between / pinch point regulations
  • Understand new ground condition regulations for cranes
  • Learn new overhead power line regulations
  • Signal Person Regulations
  • Rigging Training and Regulations
  • Practical and written testing
  • Each course participant will receive a 100+ page training manual that includes all material covered in the course for future reference

Who is a qualified rigger?

qualified rigger is a rigger who meets the criteria for a qualified person. Employers must determine whether a person is qualified to perform specific rigging tasks. Each qualified rigger may have different credentials or experience.

Does OSHA require riggers to be certified?

Formal qualification or certification in rigging is not required, as long as the employer can show the rigger has knowledge, experience and training in rigging and can demonstrate that he can solve rigging problems. Employers are not required to have riggers independently tested or assessed.

What does a certified rigger do?

certified rigger is a person who has been trained and certified to handle and move loads. The level of certification depends upon the individual’s training, knowledge, skill base, and ability to perform functions related to the selection, inspection, and proper use of rigging equipment.

More About Our OSHA Inspection Course

Safety Consultants USA is an Atlanta-based consulting company that provides OSHA compliant training for companies that operate in potentially hazardous industries. Those at Safety Consultants USA know being prepared to handle complications on a job site starts with quality training from experienced personnel. Our Rigger and Signal Persons course was created to help businesses like yours make sure their employees are able to handle the responsibilities that come with their job. This course will teach you to:

  • Understanding basic crane safety and set-up
  • Learn new caught between / pinch point regulations
  • Understand new ground condition regulations for cranes
  • Learn new overhead power line regulations
  • Signal Person Regulations
  • Rigging Training and Regulations
  • Practical and written testing
  • Each course participant will receive a 100+ page training manual that includes all material covered in the course for future reference

No matter the size of your organization, Safety Consultants USA can help deliver the safety services your company needs.

A Safety Consultants USA consultant is standing by to provide a quote on your next project by calling toll free 877-723-7622.

Request For Information
  • This field is for validation purposes and should be left unchanged.
Our mission is to provide a high engagement, interactive, safety and health learning experience for our clients.

Buford, GA

Buford is a city in Gwinnett and Hall counties in the U.S. state of Georgia. As of the 2010 census, the city had a population of 12,225. Most of the city is in Gwinnett County, which is part of the Atlanta-Sandy Springs-Marietta Metropolitan Statistical Area. The portions of the city in Hall County are not part of Atlanta’s metropolitan statistical area, but are part of Atlanta’s larger Combined Statistical Area, which includes Hall County.

The city was founded in 1872 after a railroad was built in the area connecting Charlotte, North Carolina, with Atlanta. Buford was named after Algernon Sidney Buford, who at the time was president of the Atlanta and Richmond Air-Line Railway. The city’s leather industry, led by the Bona Allen Company, as well as its location as a railway stop, caused the population to expand during the early 1900s until after the Great Depression had ended.

The city operates its own school district, the Buford City School District, and has been the birthplace and home of several musicians and athletes. Various tourist locations, including museums and community centers, the largest mall in the state of Georgia, the Mall of Georgia, and Lake Lanier Islands are in the Buford region.

Safety Consultants USA Headquarters: Atlanta, GA

8100 Roswell Road
Suite 410
Atlanta, GA 30350
1.877.7BERMAC (723.7622)

Rigger and Signal Person Training in Buford GA

Our OSHA safety consulting services include:

  • OSHA Construction Safety Consulting
  • Mock OSHA Inspections
  • OSHA Safety Training
  • Third-Party Site Safety Assessments
  • Written Health and Safety Programs and Safety Documentation
  • Safety Staffing
  • DOT/Fleet Safety Programs
  • OSHA Citation Defense
  • Workers Compensation Claims Management
Safety Consultants USA’s experienced trainers will work with you to ensure that your employees receive the training they need to work safely, while also incorporating your company-specific procedures into your safety training class.  Our trainers have years of experience in the field and are better able to engage your employees during their safety training classes than other less experienced safety professionals.

Industries in Buford, GA that we work with include:

  • General Contractors
  • Specialty Contractors
  • Residential Contractors
  • Industrial/Manufacturing
  • Trucking/Fleet Industries
  • Environmental Contractors
  • Sanitation Companies
  • Grocers
  • Quasi-Public Companies
  • Landfills
  • Automotive
  • Injection molding
  • Sheet Metal Stamping
  • Paper/Tissue Mills
  • Mobile and Tower Crane
  • Milling and Paving

For Businesses located in Buford, GA in need of Rigger and Signal Person Training

No matter the size of your organization, or how ambitious your safety goals, Safety Consultants USA can deliver the safety services your company needs. A Safety Consultants USA consultant is standing by to provide a quote on your next project. Call us at 877-723-7622.

Other cities in Gwinnett County area that we are serving in: