Rigger and Signal Person Training Muscle Shoals AL

Qualified Rigger and Signal Person Training, Muscle Shoals AL

Qualified Rigger & Signal Person Training

  • Understanding basic crane safety and set-up
  • Learn new caught between / pinch point regulations
  • Understand new ground condition regulations for cranes
  • Learn new overhead power line regulations
  • Signal Person Regulations
  • Rigging Training and Regulations
  • Practical and written testing
  • Each course participant will receive a 100+ page training manual that includes all material covered in the course for future reference

Who is a qualified rigger?

qualified rigger is a rigger who meets the criteria for a qualified person. Employers must determine whether a person is qualified to perform specific rigging tasks. Each qualified rigger may have different credentials or experience.

Does OSHA require riggers to be certified?

Formal qualification or certification in rigging is not required, as long as the employer can show the rigger has knowledge, experience and training in rigging and can demonstrate that he can solve rigging problems. Employers are not required to have riggers independently tested or assessed.

What does a certified rigger do?

certified rigger is a person who has been trained and certified to handle and move loads. The level of certification depends upon the individual’s training, knowledge, skill base, and ability to perform functions related to the selection, inspection, and proper use of rigging equipment.

More About Our OSHA Inspection Course

Safety Consultants USA is an Atlanta-based consulting company that provides OSHA compliant training for companies that operate in potentially hazardous industries. Those at Safety Consultants USA know being prepared to handle complications on a job site starts with quality training from experienced personnel. Our Rigger and Signal Persons course was created to help businesses like yours make sure their employees are able to handle the responsibilities that come with their job. This course will teach you to:

  • Understanding basic crane safety and set-up
  • Learn new caught between / pinch point regulations
  • Understand new ground condition regulations for cranes
  • Learn new overhead power line regulations
  • Signal Person Regulations
  • Rigging Training and Regulations
  • Practical and written testing
  • Each course participant will receive a 100+ page training manual that includes all material covered in the course for future reference

No matter the size of your organization, Safety Consultants USA can help deliver the safety services your company needs.

A Safety Consultants USA consultant is standing by to provide a quote on your next project by calling toll free 877-723-7622.

Safety Consultants USA Location – Birmingham, AL

Birmingham, AL

205 20th St N #202
Birmingham, AL 35203
(205) 791-7911

Request For Information
  • This field is for validation purposes and should be left unchanged.
Our mission is to provide a high engagement, interactive, safety and health learning experience for our clients.

Muscle Shoals, AL

Muscle Shoals is the largest city in Colbert County, Alabama, United States. It is located along the Tennessee River in the northern part of the state and, as of the 2010 census, the population of Muscle Shoals was 13,146. The estimated population in 2019 was 14,575.

Both the city and the Florence-Muscle Shoals Metropolitan Area (including four cities in Colbert and Lauderdale counties) are commonly called “the Shoals”.Northwest Alabama Regional Airport serves the Shoals region, located in the northwest section of the state.

Since the 1960s, the city has been known for music. Local studios and artists developed the “Muscle Shoals Sound”, including FAME Studios in the late 1950s and Muscle Shoals Sound Studio in 1969. They produced hit records that shaped the national and international history of popular music.

Due to its strategic location along the Tennessee River, Muscle Shoals had long been territory of historic Native American tribes. In the late 18th and early 19th centuries, as Europeans entered the area in greater number, it became a center of historic land disputes. The new state of Georgia had ambitions to anchor its western claims (to the Mississippi River) by encouraging European-American development here, but that project did not succeed.

In 1922 Muscle Shoals was the site of an attempted community development project by Henry Ford, noted Michigan entrepreneur of the automobile industry. He wanted to take over a dam and other infrastructure built by the War Department but did not like the terms offered. Due to Ford’s influence in the area, some streets were named after streets in Detroit, Michigan. As in Detroit, Woodward Avenue is the name of the main road through the city. Henry Ford conceived of a 75-mile industrial corridor from Decatur, Alabama to the tri-state border of Pickwick Lake.

Rigger and Signal Person Training in Muscle Shoals AL

Our OSHA safety consulting services include:

  • OSHA Construction Safety Consulting
  • Mock OSHA Inspections
  • OSHA Safety Training
  • Third-Party Site Safety Assessments
  • Written Health and Safety Programs and Safety Documentation
  • Safety Staffing
  • DOT/Fleet Safety Programs
  • OSHA Citation Defense
  • Workers Compensation Claims Management
Safety Consultants USA’s experienced trainers will work with you to ensure that your employees receive the training they need to work safely, while also incorporating your company-specific procedures into your safety training class.  Our trainers have years of experience in the field and are better able to engage your employees during their safety training classes than other less experienced safety professionals.

Industries in Muscle Shoals, AL that we work with include:

  • General Contractors
  • Specialty Contractors
  • Residential Contractors
  • Industrial/Manufacturing
  • Trucking/Fleet Industries
  • Environmental Contractors
  • Sanitation Companies
  • Grocers
  • Quasi-Public Companies
  • Landfills
  • Automotive
  • Injection molding
  • Sheet Metal Stamping
  • Paper/Tissue Mills
  • Mobile and Tower Crane
  • Milling and Paving

For Businesses located in Muscle Shoals, AL in need of Rigger and Signal Person Training

No matter the size of your organization, or how ambitious your safety goals, Safety Consultants USA can deliver the safety services your company needs. A Safety Consultants USA consultant is standing by to provide a quote on your next project. Call us at 877-723-7622.

Other services that we offer in the region:

Cities in the area that our Rigger and Signal Person Training are serving in: