Manufacturing Safety Consulting, Pooler GA
Manufacturing Safety Consulting serving in Pooler, GA
OSHA Safety Consulting for Manufacturing
The needs of manufacturers are unique when it comes to safety. In environments where both manual and automated processes are combined there are special safety challenges that must be addressed. Because the focus of OSHA compliance in manufacturing environments is different, so must the approach be tailored to these companies and their employees. The services of a manufacturing safety consultant can help a company address the OSHA-required safety training and written program compliance components, as well as uncover unsafety conditions and unsafe behaviors through targeted inspections. Here are some of the ways that we can help you reach your manufacturing safety goals and the advantages of using a safety consultant.
Many companies are uncertain where to even begin their safety journey. An excellent way to determine your current state (prior to an OSHA inspection) is a one-time facility safety audit. During an audit a safety advisor will look for violative conditions and document those findings as well as unsafe behaviors exhibited by employees. The company will receive a safety report documenting the findings and necessary corrective actions and provide a closed loop system to once the violative conditions are abated. In addition, this audit can uncover missing written safety programs and incomplete or undocumented training that is required based on the hazards which exist in the facility. These services are an excellent option for manufacturers looking for a baseline assessment.
Fractional Safety Person
Manufacturers that do not have the need for a full-time safety professional and have another employee on-staff that manages safety for the organization can often benefit from the services of a safety consultant. Many times safety rolls up under quality, operations or HR in many manufacturing environments and people in these roles can have an excellent grasp on the OSHA Regulations. People in these roles are most often very busy completing the work that is their primary function and because safety isn’t an emergency until it’s an emergency, safety can sometimes take a backseat to other priorities that are more immediate such as hiring, open enrollment, production or a quality issue. A safety consultant for manufacturing can ensure that even during busy times in an organization that the safety program continues to make progress and receives the attention required to keep the organization on the right path.
No Safety “Ownership”
There are other times when no one in the organization “owns” safety and the program exists but doesn’t receive the attention it needs to maintain compliance or ensure that the employees understand the policies and procedures. The services of a safety consultant in this environment can be especially useful because it means that someone is monitoring the safety programs to ensure they are up-to-date, conducting training with the employees and tracking safety training update requirements, and completing inspections to ensure that violative conditions are abated.
Add-on Services to Assist a Full-Time Safety Director
For larger manufacturers that employ a full-time safety director it can be useful to bring in the services of a safety consultant in order to verify that items are not being overlooked due to blind spots. In other circumstances having an objective 3rd party to verify that the observations are the same can be excellent validation for management and employees alike and can provide another point of reference to assure the organization that the safety program is headed in the right direction.
Advantages – Manufacturing Safety Consulting
Several advantages of hiring a manufacturing safety consultant may be:
- Cost – The cost of a manufacturing safety consultant is likely to be only a fraction of the cost of hiring a full-time safety director.
- Continuity – When you have a team of safety consultants who understand your facility and the operations therein, you will have the benefit of eliminating gaps that inevitably come from turnover that everyone experiences with employees.
- Expertise – A safety consultant is likely to see a wide variety of manufacturing environments and can share experiences from other facilities that may have bearing at other client facilities. The wide variety of manufacturers they are visiting, coupled with the variations in automation and even process safety management, mean that a consultant may have a broader ability to identify safety concerns and provide solutions that make sense.
- Experience – Different backgrounds and educational opportunities provide different insight to every safety professional. Often This translates to safety consultants who have seen a wide variety of environments and can bring that experience to bear on the challenges that manufacturing companies experience especially as increased automation continues to change the industry. Manufacturing safety consultants may have worked in other industries which allows them to bring unique ideas to the table when problem solving in a manufacturing environment.
What does a safety consultant do?
What is OSHA compliance?
The Occupational Safety and Health Administration (OSHA) is a branch of the federal Department of Labor charged with the task of ensuring that employers establish and maintain a safe workplace for their employees.
Pooler is a city in Chatham County, Georgia, United States. According to the official 2020 U.S. Census, the population was 25,711, up 34.3% from the 2010 population of 19,140. Pooler is located northwest of Savannah along Interstates 95 and 16. It comprises part of the Savannah metropolitan area.
Safety Consultants USA Headquarters: Atlanta, GA
8100 Roswell Road
Atlanta, GA 30350
Manufacturing Safety Consulting in Pooler GA
- OSHA Construction Safety Consulting
- Mock OSHA Inspections
- OSHA Safety Training
- Third-Party Site Safety Assessments
- Written Health and Safety Programs and Safety Documentation
- Safety Staffing
- DOT/Fleet Safety Programs
- OSHA Citation Defense
- Workers Compensation Claims Management
OSHA Safety Training – Pooler, GA
Third-Party Site Safety Assessments for businesses in Pooler, GA
Written Health and Safety Programs
Safety Consultants USA can provide you with an entire safety and health program. Our written safety and health programs are customized for each client and are updated as regulatory changes occur. We can also update the program you currently have in place to ensure it meets current OSHA regulations.
Safety Consultants USA offers a full suite of safety professionals available for work anywhere in the US. We can staff both short and long-term projects. We will work with you to find the right safety professional to fit your requirements and your budget.
OSHA Citation Defense
Safety Consultants USA has significant experience working with companies to resolve OSHA citations. We will strategize with our clients to negotiate settlements with OSHA when necessary and ensure proper abatement of OSHA citations. Make sure you have the right team on your side when OSHA pays you a visit.
Workers Compensation Claims Management
Safety Consultants USA has experience in managing your worker’s compensation claims. From the first report of injury to release to full duty, we ensure that you execute efficiently. A worker’s compensation claim handled correctly will save you both time and money.
Why Choose Safety Consultants USA for OSHA Consulting?
Safety Consultants USA offers a full range of health and safety services with the flexibility to meet your budget. We service many industries, helping each of our clients improve safety and reduce injuries. To ensure that we meet our commitment, we work to build strong relationships with our clients at all levels of the organization. We recognize that building lasting relationships requires consistency. We have implemented a series of reporting and tracking procedures that allow us to ensure that you get the same high-quality information, no matter who visits your job site.
No matter the size of your organization, Safety Consultants USA can deliver the safety services your company needs. A Safety Consultants USA consultant is standing by to provide a quote on your next project. Call toll free 877-723-7622.
Industries in Pooler, GA that we work with include:
- General Contractors
- Specialty Contractors
- Residential Contractors
- Trucking/Fleet Industries
- Environmental Contractors
- Sanitation Companies
- Quasi-Public Companies
- Injection molding
- Sheet Metal Stamping
- Paper/Tissue Mills
- Mobile and Tower Crane
- Milling and Paving