877-723-7622 Growing Safely Across the Nation

Qualified Rigger and Signal Person Training, Moultrie GA

Qualified Rigger & Signal Person Training

  • Understanding basic crane safety and set-up
  • Learn new caught between / pinch point regulations
  • Understand new ground condition regulations for cranes
  • Learn new overhead power line regulations
  • Signal Person Regulations
  • Rigging Training and Regulations
  • Practical and written testing
  • Each course participant will receive a 100+ page training manual that includes all material covered in the course for future reference

What is a qualified rigger?

A qualified rigger “possesses a recognized degree, certificate, or professional standing, OR who by extensive knowledge, training and experience, can successfully demonstrate the ability to solve problems related to rigging loads”.

Which OSHA requirements must a rigger meet to be considered a qualified signal person?

A Signalperson is required, according to OSHA regulations, in the following situations: The operator does not have a full view of the point of operation. The operator’s view is obstructed in the direction that the equipment is moving. The operator or the person handling the load feels that a signalperson is needed.

What does a certified rigger do?

A certified rigger is a person who has been trained and certified to handle and move loads. The level of certification depends upon the individual’s training, knowledge, skill base, and ability to perform functions related to the selection, inspection, and proper use of rigging equipment.

Signalperson and Rigger: Qualification vs. Certification

The federal Occupational Safety and Health Administration (OSHA) has specific—but different—qualification requirements for signalpersons and riggers. In both cases people often wonder whether “certification” equals “qualification,” and, if not, what the difference is. The main difference is the level of testing required. Qualification is done by the employer and may or may not involve formal testing; it is at the discretion of the employer’s qualified evaluator. Certification requires third-party testing to provide a consistent and accurate means to determine a person’s technical knowledge and hands-on skills related to the task.

More About Our OSHA Inspection Course

Safety Consultants USA is an Atlanta-based consulting company that provides OSHA compliant training for companies that operate in potentially hazardous industries. Those at Safety Consultants USA know being prepared to handle complications on a job site starts with quality training from experienced personnel. Our Rigger and Signal Persons course was created to help businesses like yours make sure their employees are able to handle the responsibilities that come with their job. This course will teach you to:

  • Understanding basic crane safety and set-up
  • Learn new caught between / pinch point regulations
  • Understand new ground condition regulations for cranes
  • Learn new overhead power line regulations
  • Signal Person Regulations
  • Rigging Training and Regulations
  • Practical and written testing
  • Each course participant will receive a 100+ page training manual that includes all material covered in the course for future reference

No matter the size of your organization, Safety Consultants USA can help deliver the safety services your company needs.

A Safety Consultants USA consultant is standing by to provide a quote on your next project by calling toll free 877-723-7622.

Tel: 877-723-7622
Request For Information
  • This field is for validation purposes and should be left unchanged.
Our mission is to provide a high engagement, interactive, safety and health learning experience for our clients.

Moultrie, GA

Moultrie is the county seat and largest city of Colquitt County, Georgia, United States. It is the third largest city in Southwest Georgia, behind Thomasville and Albany. As of the 2010 census, Moultrie’s population was 14,268. It was originally known as Ochlockoney until it was incorporated by the Georgia General Assembly in 1859.
Moultrie is an agricultural community set in the Southern Rivers part of Georgia. It is well known for its antique shops and has been styled “The Antique Capital of South Georgia”. Moultrie is the home of Former US Senator Saxby Chambliss.
Downtown Moultrie contains the Moultrie Commercial Historic District, listed on the National Register of Historic Places. The district includes the Colquitt Theatre.

Safety Consultants USA Headquarters: Atlanta, GA

8100 Roswell Road
Suite 410
Atlanta, GA 30350
1.877.723.7622

Rigger and Signal Person Training in Moultrie GA

Our OSHA safety consulting services include:

  • OSHA Construction Safety Consulting
  • Mock OSHA Inspections
  • OSHA Safety Training
  • Third-Party Site Safety Assessments
  • Written Health and Safety Programs and Safety Documentation
  • Safety Staffing
  • DOT/Fleet Safety Programs
  • OSHA Citation Defense
  • Workers Compensation Claims Management
Safety Consultants USA’s experienced trainers will work with you to ensure that your employees receive the training they need to work safely, while also incorporating your company-specific procedures into your safety training class.  Our trainers have years of experience in the field and are better able to engage your employees during their safety training classes than other less experienced safety professionals.

Industries in Moultrie, GA that we work with include:

  • General Contractors
  • Specialty Contractors
  • Residential Contractors
  • Industrial/Manufacturing
  • Trucking/Fleet Industries
  • Environmental Contractors
  • Sanitation Companies
  • Grocers
  • Quasi-Public Companies
  • Landfills
  • Automotive
  • Injection molding
  • Sheet Metal Stamping
  • Paper/Tissue Mills
  • Mobile and Tower Crane
  • Milling and Paving

For Businesses located in Moultrie, GA in need of Rigger and Signal Person Training

No matter the size of your organization, or how ambitious your safety goals, Safety Consultants USA can deliver the safety services your company needs. A Safety Consultants USA consultant is standing by to provide a quote on your next project. Call us at 877-723-7622.

Other services that we offer in the region:

[page-generator-pro-related-links group_id=”13631,7855″ post_status=”publish” post_parent=”georgia/Colquitt County/Moultrie” output_type=”list_links” limit=”0″ columns=”2″ link_title=”%title” link_anchor_title=”%title” link_featured_image=”0″ orderby=”rand” order=”asc”]

Cities in the area that our Rigger and Signal Person Training are serving in:

[page-generator-pro-related-links group_id=”1527″ output_type=”list_links” link_title=”%title” limit=”0″ columns=”2″ parent_title=”%title” next_title=”%title »” prev_title=”« %title” post_status=”publish” post_parent=”georgia/Colquitt County” orderby=”none” order=”asc”]