Qualified Rigger and Signal Person Training, Lithia Springs GA
Qualified Rigger & Signal Person Training
- Understanding basic crane safety and set-up
- Learn new caught between / pinch point regulations
- Understand new ground condition regulations for cranes
- Learn new overhead power line regulations
- Signal Person Regulations
- Rigging Training and Regulations
- Practical and written testing
- Each course participant will receive a 100+ page training manual that includes all material covered in the course for future reference
What is a qualified rigger?
Which OSHA requirements must a rigger meet to be considered a qualified signal person?
What does a certified rigger do?
A certified rigger is a person who has been trained and certified to handle and move loads. The level of certification depends upon the individual’s training, knowledge, skill base, and ability to perform functions related to the selection, inspection, and proper use of rigging equipment.
Signalperson and Rigger: Qualification vs. Certification
The federal Occupational Safety and Health Administration (OSHA) has specific—but different—qualification requirements for signalpersons and riggers. In both cases people often wonder whether “certification” equals “qualification,” and, if not, what the difference is. The main difference is the level of testing required. Qualification is done by the employer and may or may not involve formal testing; it is at the discretion of the employer’s qualified evaluator. Certification requires third-party testing to provide a consistent and accurate means to determine a person’s technical knowledge and hands-on skills related to the task.
More About Our OSHA Inspection Course
Safety Consultants USA is an Atlanta-based consulting company that provides OSHA compliant training for companies that operate in potentially hazardous industries. Those at Safety Consultants USA know being prepared to handle complications on a job site starts with quality training from experienced personnel. Our Rigger and Signal Persons course was created to help businesses like yours make sure their employees are able to handle the responsibilities that come with their job. This course will teach you to:
- Understanding basic crane safety and set-up
- Learn new caught between / pinch point regulations
- Understand new ground condition regulations for cranes
- Learn new overhead power line regulations
- Signal Person Regulations
- Rigging Training and Regulations
- Practical and written testing
- Each course participant will receive a 100+ page training manual that includes all material covered in the course for future reference
No matter the size of your organization, Safety Consultants USA can help deliver the safety services your company needs.
A Safety Consultants USA consultant is standing by to provide a quote on your next project by calling toll free 877-723-7622.
Lithia Springs, GA
Lithia Springs is a census-designated place and unincorporated area, formerly incorporated as a city, located in northeastern Douglas County, Georgia, United States. As of the 2020 census, the community had a population of 16,644. The area is named for its historic “lithia” mineral water springs.
Incorporated in 1882, Lithia Springs was dissolved the first time in 1933. Lithia Springs became incorporated again in 1994, to be Douglas County’s second completely internal municipality, but disincorporated again in 2000.
In 2000, the citizens voted (80% yea, 20% nay) on December 20 to dissolve the city charter and de-incorporate the city, transferring all assets to the county. The referendum that ended the town was part of the settlement in a lawsuit brought by city residents charging the city should be dissolved because it did not deliver enough services to justify its existence under state law. During its incorporation until 2000, the former city had five mayors.
Lithia Springs is assigned the United States Postal Service ZIP code of 30122.
Safety Consultants USA Headquarters: Atlanta, GA
8100 Roswell Road
Suite 410
Atlanta, GA 30350
1.877.723.7622
Rigger and Signal Person Training in Lithia Springs GA
- OSHA Construction Safety Consulting
- Mock OSHA Inspections
- OSHA Safety Training
- Third-Party Site Safety Assessments
- Written Health and Safety Programs and Safety Documentation
- Safety Staffing
- DOT/Fleet Safety Programs
- OSHA Citation Defense
- Workers Compensation Claims Management
Industries in Lithia Springs, GA that we work with include:
- General Contractors
- Specialty Contractors
- Residential Contractors
- Industrial/Manufacturing
- Trucking/Fleet Industries
- Environmental Contractors
- Sanitation Companies
- Grocers
- Quasi-Public Companies
- Landfills
- Automotive
- Injection molding
- Sheet Metal Stamping
- Paper/Tissue Mills
- Mobile and Tower Crane
- Milling and Paving
For Businesses located in Lithia Springs, GA in need of Rigger and Signal Person Training
Other services that we offer in the region:
[page-generator-pro-related-links group_id=”13631,7855″ post_status=”publish” post_parent=”georgia/Douglas County/Lithia Springs” output_type=”list_links” limit=”0″ columns=”2″ link_title=”%title” link_anchor_title=”%title” link_featured_image=”0″ orderby=”rand” order=”asc”]
Cities in the area that our Rigger and Signal Person Training are serving in:
[page-generator-pro-related-links group_id=”1527″ output_type=”list_links” link_title=”%title” limit=”0″ columns=”2″ parent_title=”%title” next_title=”%title »” prev_title=”« %title” post_status=”publish” post_parent=”georgia/Douglas County” orderby=”none” order=”asc”]