877-723-7622 Growing Safely Across the Nation

Qualified Rigger and Signal Person Training, Rome GA

Qualified Rigger & Signal Person Training

  • Understanding basic crane safety and set-up
  • Learn new caught between / pinch point regulations
  • Understand new ground condition regulations for cranes
  • Learn new overhead power line regulations
  • Signal Person Regulations
  • Rigging Training and Regulations
  • Practical and written testing
  • Each course participant will receive a 100+ page training manual that includes all material covered in the course for future reference

What is a qualified rigger?

A qualified rigger “possesses a recognized degree, certificate, or professional standing, OR who by extensive knowledge, training and experience, can successfully demonstrate the ability to solve problems related to rigging loads”.

Which OSHA requirements must a rigger meet to be considered a qualified signal person?

A Signalperson is required, according to OSHA regulations, in the following situations: The operator does not have a full view of the point of operation. The operator’s view is obstructed in the direction that the equipment is moving. The operator or the person handling the load feels that a signalperson is needed.

What does a certified rigger do?

certified rigger is a person who has been trained and certified to handle and move loads. The level of certification depends upon the individual’s training, knowledge, skill base, and ability to perform functions related to the selection, inspection, and proper use of rigging equipment.

Signalperson and Rigger: Qualification vs. Certification

The federal Occupational Safety and Health Administration (OSHA) has specific—but different—qualification requirements for signalpersons and riggers. In both cases people often wonder whether “certification” equals “qualification,” and, if not, what the difference is. The main difference is the level of testing required. Qualification is done by the employer and may or may not involve formal testing; it is at the discretion of the employer’s qualified evaluator. Certification requires third-party testing to provide a consistent and accurate means to determine a person’s technical knowledge and hands-on skills related to the task.

More About Our OSHA Inspection Course

Safety Consultants USA is an Atlanta-based consulting company that provides OSHA compliant training for companies that operate in potentially hazardous industries. Those at Safety Consultants USA know being prepared to handle complications on a job site starts with quality training from experienced personnel. Our Rigger and Signal Persons course was created to help businesses like yours make sure their employees are able to handle the responsibilities that come with their job. This course will teach you to:

  • Understanding basic crane safety and set-up
  • Learn new caught between / pinch point regulations
  • Understand new ground condition regulations for cranes
  • Learn new overhead power line regulations
  • Signal Person Regulations
  • Rigging Training and Regulations
  • Practical and written testing
  • Each course participant will receive a 100+ page training manual that includes all material covered in the course for future reference

No matter the size of your organization, Safety Consultants USA can help deliver the safety services your company needs.

A Safety Consultants USA consultant is standing by to provide a quote on your next project by calling toll free 877-723-7622.

Request For Information
  • This field is for validation purposes and should be left unchanged.
Our mission is to provide a high engagement, interactive, safety and health learning experience for our clients.

Rome, GA

Rome is the largest city in and the county seat of Floyd County, Georgia, United States. Located in the foothills of the Appalachian Mountains, it is the principal city of the Rome, Georgia, metropolitan statistical area, which encompasses all of Floyd County. At the 2020 census, the city had a population of 37,713. It is the largest city in Northwest Georgia and the 22nd-largest city in the state.

Rome was founded in 1834, after Congress passed the Indian Removal Act, and the federal government committed to removing the Cherokee and other Native Americans from the Southeast. It developed on former indigenous territory at the confluence of the Etowah and the Oostanaula rivers, which together form the Coosa River. Because of its strategic advantages, this area was long occupied by the historic Creek. Later the Cherokee people expanded into this area from their traditional homelands to the east and northeast. National leaders such as Major Ridge and John Ross resided here before Indian Removal in 1838.

The city has developed on seven hills with the rivers running between them, a feature that inspired the early European-American settlers to name it for Rome, the longtime capital of Italy that was also built on seven hills. The American Rome developed in the antebellum period as a market and trading city due to its advantageous location on the rivers. It shipped the rich regional cotton commodity crop downriver to markets on the Gulf Coast and export overseas.

In the late 1920s, a United States company built a rayon plant in a joint project with an Italian company. This project and the American city of Rome were honored by Italy in 1929, when its duce Benito Mussolini sent a replica of the statue of Romulus and Remus nursing from a mother wolf, a symbol of the founding myth of the original Rome.

It is the largest city near the center of the triangular area defined by the Interstate highways between Atlanta, Birmingham, and Chattanooga. It has developed as a regional center for the fields of medical care and education. In addition to its public-school system, it has several private schools. Higher-level institutions include private Berry College and Shorter University, and the public Georgia Northwestern Technical College and Georgia Highlands College.

Safety Consultants USA Headquarters: Atlanta, GA

8100 Roswell Road
Suite 410
Atlanta, GA 30350
1.877.723.7622

Rigger and Signal Person Training in Rome GA

Our OSHA safety consulting services include:

  • OSHA Construction Safety Consulting
  • Mock OSHA Inspections
  • OSHA Safety Training
  • Third-Party Site Safety Assessments
  • Written Health and Safety Programs and Safety Documentation
  • Safety Staffing
  • DOT/Fleet Safety Programs
  • OSHA Citation Defense
  • Workers Compensation Claims Management
Safety Consultants USA’s experienced trainers will work with you to ensure that your employees receive the training they need to work safely, while also incorporating your company-specific procedures into your safety training class.  Our trainers have years of experience in the field and are better able to engage your employees during their safety training classes than other less experienced safety professionals.

Industries in Rome, GA that we work with include:

  • General Contractors
  • Specialty Contractors
  • Residential Contractors
  • Industrial/Manufacturing
  • Trucking/Fleet Industries
  • Environmental Contractors
  • Sanitation Companies
  • Grocers
  • Quasi-Public Companies
  • Landfills
  • Automotive
  • Injection molding
  • Sheet Metal Stamping
  • Paper/Tissue Mills
  • Mobile and Tower Crane
  • Milling and Paving

For Businesses located in Rome, GA in need of Rigger and Signal Person Training

No matter the size of your organization, or how ambitious your safety goals, Safety Consultants USA can deliver the safety services your company needs. A Safety Consultants USA consultant is standing by to provide a quote on your next project. Call us at 877-723-7622.

Other services that we offer in the region:

[page-generator-pro-related-links group_id=”13631,7855″ post_status=”publish” post_parent=”georgia/Floyd County/Rome” output_type=”list_links” limit=”0″ columns=”2″ link_title=”%title” link_anchor_title=”%title” link_featured_image=”0″ orderby=”rand” order=”asc”]

Cities in the area that our Rigger and Signal Person Training are serving in:

[page-generator-pro-related-links group_id=”1527″ output_type=”list_links” link_title=”%title” limit=”0″ columns=”2″ parent_title=”%title” next_title=”%title »” prev_title=”« %title” post_status=”publish” post_parent=”georgia/Floyd County” orderby=”none” order=”asc”]