877-723-7622 Growing Safely Across the Nation

Qualified Rigger and Signal Person Training, Brunswick GA

Qualified Rigger & Signal Person Training

  • Understanding basic crane safety and set-up
  • Learn new caught between / pinch point regulations
  • Understand new ground condition regulations for cranes
  • Learn new overhead power line regulations
  • Signal Person Regulations
  • Rigging Training and Regulations
  • Practical and written testing
  • Each course participant will receive a 100+ page training manual that includes all material covered in the course for future reference

What is a qualified rigger?

A qualified rigger “possesses a recognized degree, certificate, or professional standing, OR who by extensive knowledge, training and experience, can successfully demonstrate the ability to solve problems related to rigging loads”.

Which OSHA requirements must a rigger meet to be considered a qualified signal person?

A Signalperson is required, according to OSHA regulations, in the following situations: The operator does not have a full view of the point of operation. The operator’s view is obstructed in the direction that the equipment is moving. The operator or the person handling the load feels that a signalperson is needed.

What does a certified rigger do?

A certified rigger is a person who has been trained and certified to handle and move loads. The level of certification depends upon the individual’s training, knowledge, skill base, and ability to perform functions related to the selection, inspection, and proper use of rigging equipment.

Signalperson and Rigger: Qualification vs. Certification

The federal Occupational Safety and Health Administration (OSHA) has specific—but different—qualification requirements for signalpersons and riggers. In both cases people often wonder whether “certification” equals “qualification,” and, if not, what the difference is. The main difference is the level of testing required. Qualification is done by the employer and may or may not involve formal testing; it is at the discretion of the employer’s qualified evaluator. Certification requires third-party testing to provide a consistent and accurate means to determine a person’s technical knowledge and hands-on skills related to the task.

More About Our OSHA Inspection Course

Safety Consultants USA is an Atlanta-based consulting company that provides OSHA compliant training for companies that operate in potentially hazardous industries. Those at Safety Consultants USA know being prepared to handle complications on a job site starts with quality training from experienced personnel. Our Rigger and Signal Persons course was created to help businesses like yours make sure their employees are able to handle the responsibilities that come with their job. This course will teach you to:

  • Understanding basic crane safety and set-up
  • Learn new caught between / pinch point regulations
  • Understand new ground condition regulations for cranes
  • Learn new overhead power line regulations
  • Signal Person Regulations
  • Rigging Training and Regulations
  • Practical and written testing
  • Each course participant will receive a 100+ page training manual that includes all material covered in the course for future reference

No matter the size of your organization, Safety Consultants USA can help deliver the safety services your company needs.

A Safety Consultants USA consultant is standing by to provide a quote on your next project by calling toll free 877-723-7622.

Tel: 877-723-7622
Request For Information
  • This field is for validation purposes and should be left unchanged.
Our mission is to provide a high engagement, interactive, safety and health learning experience for our clients.

Brunswick, GA

Brunswick is a city in and the county seat of Glynn County, Georgia, United States. As the main urban and economic center of the lower southeast part of the state, it is the second-largest urban area on the Georgia coast after Savannah and contains the Brunswick Old Town Historic District.

British colonists settled the peninsula in 1738 as a buffer to Spanish Florida. It came under provincial control in 1771 and was founded as “Brunswick” after the German duchy of Brunswick–Lüneburg, the ancestral home of the House of Hanover. It was incorporated as a city in 1856. Throughout its history, Brunswick has served as an important port city: in World War II, it served as a strategic military location with an operational base for escort blimps and a shipbuilding facility for the U.S. Maritime Commission.

Brunswick supports a progressive economy largely based on tourism and logistics, with a metropolitan GDP of $3.9 billion. The Port of Brunswick handles approximately 10 percent of all U.S. roll-on/roll-off trade—third in the U.S., behind the ports of Los Angeles and Newark. The headquarters of the Federal Law Enforcement Training Center is located 5 miles (8 km) north of the central business district of the city and is adjacent to Brunswick Golden Isles Airport, which provides commercial air service to the area. In the 2010 U.S. census, the population of the city proper was 15,383; the urban area, 51,024; and the metropolitan area, 112,370.

Brunswick is located on a harbor of the Atlantic Ocean, approximately 40 mi (60 km) north of Florida and 80 mi (130 km) south of South Carolina. Brunswick is bordered on the west by Oglethorpe Bay, the East River, and the Turtle River. It is bordered on the south by the Brunswick River and on the east by the Atlantic Intracoastal Waterway in the Mackay River, which separates it from the Golden Isles.

Safety Consultants USA Headquarters: Atlanta, GA

8100 Roswell Road
Suite 410
Atlanta, GA 30350
1.877.723.7622

Rigger and Signal Person Training in Brunswick GA

Our OSHA safety consulting services include:

  • OSHA Construction Safety Consulting
  • Mock OSHA Inspections
  • OSHA Safety Training
  • Third-Party Site Safety Assessments
  • Written Health and Safety Programs and Safety Documentation
  • Safety Staffing
  • DOT/Fleet Safety Programs
  • OSHA Citation Defense
  • Workers Compensation Claims Management
Safety Consultants USA’s experienced trainers will work with you to ensure that your employees receive the training they need to work safely, while also incorporating your company-specific procedures into your safety training class.  Our trainers have years of experience in the field and are better able to engage your employees during their safety training classes than other less experienced safety professionals.

Industries in Brunswick, GA that we work with include:

  • General Contractors
  • Specialty Contractors
  • Residential Contractors
  • Industrial/Manufacturing
  • Trucking/Fleet Industries
  • Environmental Contractors
  • Sanitation Companies
  • Grocers
  • Quasi-Public Companies
  • Landfills
  • Automotive
  • Injection molding
  • Sheet Metal Stamping
  • Paper/Tissue Mills
  • Mobile and Tower Crane
  • Milling and Paving

For Businesses located in Brunswick, GA in need of Rigger and Signal Person Training

No matter the size of your organization, or how ambitious your safety goals, Safety Consultants USA can deliver the safety services your company needs. A Safety Consultants USA consultant is standing by to provide a quote on your next project. Call us at 877-723-7622.

Other services that we offer in the region:

[page-generator-pro-related-links group_id=”13631,7855″ post_status=”publish” post_parent=”georgia/Glynn County/Brunswick” output_type=”list_links” limit=”0″ columns=”2″ link_title=”%title” link_anchor_title=”%title” link_featured_image=”0″ orderby=”rand” order=”asc”]

Cities in the area that our Rigger and Signal Person Training are serving in:

[page-generator-pro-related-links group_id=”1527″ output_type=”list_links” link_title=”%title” limit=”0″ columns=”2″ parent_title=”%title” next_title=”%title »” prev_title=”« %title” post_status=”publish” post_parent=”georgia/Glynn County” orderby=”none” order=”asc”]