Qualified Rigger and Signal Person Training, Buford GA
Qualified Rigger & Signal Person Training
- Understanding basic crane safety and set-up
- Learn new caught between / pinch point regulations
- Understand new ground condition regulations for cranes
- Learn new overhead power line regulations
- Signal Person Regulations
- Rigging Training and Regulations
- Practical and written testing
- Each course participant will receive a 100+ page training manual that includes all material covered in the course for future reference
What is a qualified rigger?
Which OSHA requirements must a rigger meet to be considered a qualified signal person?
What does a certified rigger do?
A certified rigger is a person who has been trained and certified to handle and move loads. The level of certification depends upon the individual’s training, knowledge, skill base, and ability to perform functions related to the selection, inspection, and proper use of rigging equipment.
Signalperson and Rigger: Qualification vs. Certification
The federal Occupational Safety and Health Administration (OSHA) has specific—but different—qualification requirements for signalpersons and riggers. In both cases people often wonder whether “certification” equals “qualification,” and, if not, what the difference is. The main difference is the level of testing required. Qualification is done by the employer and may or may not involve formal testing; it is at the discretion of the employer’s qualified evaluator. Certification requires third-party testing to provide a consistent and accurate means to determine a person’s technical knowledge and hands-on skills related to the task.
More About Our OSHA Inspection Course
Safety Consultants USA is an Atlanta-based consulting company that provides OSHA compliant training for companies that operate in potentially hazardous industries. Those at Safety Consultants USA know being prepared to handle complications on a job site starts with quality training from experienced personnel. Our Rigger and Signal Persons course was created to help businesses like yours make sure their employees are able to handle the responsibilities that come with their job. This course will teach you to:
- Understanding basic crane safety and set-up
- Learn new caught between / pinch point regulations
- Understand new ground condition regulations for cranes
- Learn new overhead power line regulations
- Signal Person Regulations
- Rigging Training and Regulations
- Practical and written testing
- Each course participant will receive a 100+ page training manual that includes all material covered in the course for future reference
No matter the size of your organization, Safety Consultants USA can help deliver the safety services your company needs.
A Safety Consultants USA consultant is standing by to provide a quote on your next project by calling toll free 877-723-7622.
Buford, GA
Buford is a city in Gwinnett and Hall counties in the U.S. state of Georgia. As of the 2020 census, the city had a population of 17,144. Most of the city is in Gwinnett County, which is part of the Atlanta-Sandy Springs-Marietta Metropolitan Statistical Area. The northern sliver of the city is in Hall County, which comprises the Gainesville, Georgia Metropolitan Statistical Area and is part of the larger Atlanta-Athens-Clarke-Sandy Springs Combined Statistical Area.
The city was founded in 1872 after a railroad was built in the area connecting Charlotte, North Carolina, with Atlanta. Buford was named after Algernon Sidney Buford, who at the time was president of the Atlanta and Richmond Air-Line Railway. The city’s leather industry, led by the Bona Allen Company, as well as its location as a railway stop, caused the population to expand during the early 1900s until after the Great Depression had ended.
The city operates its own school district, the Buford City School District, and has been the birthplace and home of several musicians and athletes. Various tourist locations, including museums and community centers, the largest mall in the state of Georgia, the Mall of Georgia, and Lake Lanier Islands are in the Buford region.
Safety Consultants USA Headquarters: Atlanta, GA
8100 Roswell Road
Suite 410
Atlanta, GA 30350
1.877.723.7622
Rigger and Signal Person Training in Buford GA
- OSHA Construction Safety Consulting
- Mock OSHA Inspections
- OSHA Safety Training
- Third-Party Site Safety Assessments
- Written Health and Safety Programs and Safety Documentation
- Safety Staffing
- DOT/Fleet Safety Programs
- OSHA Citation Defense
- Workers Compensation Claims Management
Industries in Buford, GA that we work with include:
- General Contractors
- Specialty Contractors
- Residential Contractors
- Industrial/Manufacturing
- Trucking/Fleet Industries
- Environmental Contractors
- Sanitation Companies
- Grocers
- Quasi-Public Companies
- Landfills
- Automotive
- Injection molding
- Sheet Metal Stamping
- Paper/Tissue Mills
- Mobile and Tower Crane
- Milling and Paving
For Businesses located in Buford, GA in need of Rigger and Signal Person Training
Other services that we offer in the region:
[page-generator-pro-related-links group_id=”13631,7855″ post_status=”publish” post_parent=”georgia/Gwinnett County/Buford” output_type=”list_links” limit=”0″ columns=”2″ link_title=”%title” link_anchor_title=”%title” link_featured_image=”0″ orderby=”rand” order=”asc”]
Cities in the area that our Rigger and Signal Person Training are serving in:
[page-generator-pro-related-links group_id=”1527″ output_type=”list_links” link_title=”%title” limit=”0″ columns=”2″ parent_title=”%title” next_title=”%title »” prev_title=”« %title” post_status=”publish” post_parent=”georgia/Gwinnett County” orderby=”none” order=”asc”]