877-723-7622 Based in Atlanta, Growing Safely Across the Nation

Rigger and Signal Person Training Seven Oaks SC

Qualified Rigger and Signal Person Training, Seven Oaks SC

Qualified Rigger & Signal Person Training

  • Understanding basic crane safety and set-up
  • Learn new caught between / pinch point regulations
  • Understand new ground condition regulations for cranes
  • Learn new overhead power line regulations
  • Signal Person Regulations
  • Rigging Training and Regulations
  • Practical and written testing
  • Each course participant will receive a 100+ page training manual that includes all material covered in the course for future reference

Who is a qualified rigger?

qualified rigger is a rigger who meets the criteria for a qualified person. Employers must determine whether a person is qualified to perform specific rigging tasks. Each qualified rigger may have different credentials or experience.

Does OSHA require riggers to be certified?

Formal qualification or certification in rigging is not required, as long as the employer can show the rigger has knowledge, experience and training in rigging and can demonstrate that he can solve rigging problems. Employers are not required to have riggers independently tested or assessed.

What does a certified rigger do?

certified rigger is a person who has been trained and certified to handle and move loads. The level of certification depends upon the individual’s training, knowledge, skill base, and ability to perform functions related to the selection, inspection, and proper use of rigging equipment.

More About Our OSHA Inspection Course

Safety Consultants USA is an Atlanta-based consulting company that provides OSHA compliant training for companies that operate in potentially hazardous industries. Those at Safety Consultants USA know being prepared to handle complications on a job site starts with quality training from experienced personnel. Our Rigger and Signal Persons course was created to help businesses like yours make sure their employees are able to handle the responsibilities that come with their job. This course will teach you to:

  • Understanding basic crane safety and set-up
  • Learn new caught between / pinch point regulations
  • Understand new ground condition regulations for cranes
  • Learn new overhead power line regulations
  • Signal Person Regulations
  • Rigging Training and Regulations
  • Practical and written testing
  • Each course participant will receive a 100+ page training manual that includes all material covered in the course for future reference

No matter the size of your organization, Safety Consultants USA can help deliver the safety services your company needs.

A Safety Consultants USA consultant is standing by to provide a quote on your next project by calling toll free 877-723-7622.

Safety Consultants USA Location – Charlotte, NC

Charlotte, NC

712 Lindholm Drive
Suite 300
Huntersville, NC 28078
(704) 626-6196
Fax: (704) 626-6195

Request For Information
  • This field is for validation purposes and should be left unchanged.
Our mission is to provide a high engagement, interactive, safety and health learning experience for our clients.

Seven Oaks, SC

Seven Oaks is a census-designated place (CDP) in Lexington County, South Carolina, United States, six miles outside Columbia. The population was 15,755 at the 2000 census. It is part of the Columbia, South Carolina Metropolitan Statistical Area.

Seven Oaks is located at 34°2′57″N 81°8′31″W / 34.04917°N 81.14194°W / 34.04917; -81.14194 (34.049200, -81.141948).

According to the United States Census Bureau, the CDP has a total area of 7.9 square miles (20.6 km²), of which 7.8 square miles (20.3 km²) is land and 0.1 square mile (0.3 km²) (1.38%) is water.

At the 2000 census there were 15,755 people, 6,633 households, and 4,324 families living in the CDP. The population density was 2,007.9 people per square mile (774.9/km²). There were 6,979 housing units at an average density of 889.4 per square mile (343.3/km²). The racial makeup of the CDP was 73.51% White, 21.50% African American, 0.33% Native American, 2.81% Asian, 0.06% Pacific Islander, 0.58% from other races, and 1.21% from two or more races. Hispanic or Latino of any race were 1.89%.

Of the 6,633 households 30.4% had children under the age of 18 living with them, 50.5% were married couples living together, 11.8% had a female householder with no husband present, and 34.8% were non-families. 27.9% of households were one person and 6.8% were one person aged 65 or older. The average household size was 2.35 and the average family size was 2.89.

Rigger and Signal Person Training in Seven Oaks, SC

Our OSHA safety consulting services include:

  • OSHA Construction Safety Consulting
  • Mock OSHA Inspections
  • OSHA Safety Training
  • Third-Party Site Safety Assessments
  • Written Health and Safety Programs and Safety Documentation
  • Safety Staffing
  • DOT/Fleet Safety Programs
  • OSHA Citation Defense
  • Workers Compensation Claims Management
Safety Consultants USA’s experienced trainers will work with you to ensure that your employees receive the training they need to work safely, while also incorporating your company-specific procedures into your safety training class.  Our trainers have years of experience in the field and are better able to engage your employees during their safety training classes than other less experienced safety professionals.

Industries in Seven Oaks, SC that we work with include:

  • General Contractors
  • Specialty Contractors
  • Residential Contractors
  • Industrial/Manufacturing
  • Trucking/Fleet Industries
  • Environmental Contractors
  • Sanitation Companies
  • Grocers
  • Quasi-Public Companies
  • Landfills
  • Automotive
  • Injection molding
  • Sheet Metal Stamping
  • Paper/Tissue Mills
  • Mobile and Tower Crane
  • Milling and Paving

For Businesses located in Seven Oaks, SC in need of Rigger and Signal Person Training

No matter the size of your organization, or how ambitious your safety goals, Safety Consultants USA can deliver the safety services your company needs. A Safety Consultants USA consultant is standing by to provide a quote on your next project. Call us at 877-723-7622.